Magne Corporation
9380 Watson Industrial Park | St. Louis, MO 63126 | 314/968-9500 | Fax 314/968-3030 | 1-888-77-MAGNE (888/776-2463)

Shaft Mount - Brakes

Model	A	B	C	D	E	F			G	H	Keyway
						Holes	Studs	THD
5MB90S	3.44	3.44	3.62	.625	4.25	3	-	#10-24 x 3/8DP	2.84	.88	3/16W x 3/32DP
25MB90S	3.69	4.57	5.88	1.125	6.25	-	3	#10-32	2.63	2.88	1/4W x 1/8DP
50MB90S	4.66	6.62	8.41	1.750	9.03	-	4	1/4-20	3.16	2.63	3/8W x 3/16DP
75MB90S	5.91	6.62	9.34	(8)	10.01	-	4	1/4-20	5.13	6.88	Taper Lock (8)

NOTES:

1. Consult factory for dimensions of forced air cooled units.
2. Recommended maximum shaft deviation from horizontal is 30 degrees. Above 30 degrees consult factory.
3. Bore adapters available for 25, 50 and 75 series brakes, consult factory.
4. Suitable torque arm required to prevent rotation. Mounting should be "floating."
5. Physical appearance may vary between models.
6. Shaft key supplied with all units.
7. All dimentions in inches.
8. Unit supplied with 1615B adapter - customer to furnish taper lock bushings.

Home | Top of Page